GB/T 307.1-2017 Geometrical Specifications (GPS) and Tolerance Values for Rolling Bearings and Radial Bearings

2022/11/03

这里是占位文字

GBT 4604.1-2012 Rolling Bearing Clearances Part 1: Radial Clearances of Radial Bearings

2022/11/03

这里是占位文字

Leaders of Bearing Association visited our company

2022/10/21

这里是占位文字

Imported bearings should be regularly maintained and inspected

In terms of the speed of imported bearings, the imported bearings are determined according to the type, size, accuracy, cage type, load, lubrication mode, cooling mode and other factors of imported bearings. The installation and disassembly of the imported bearing shall be frequently disassembled and installed in specific applications to ensure that it can be inspected and repaired according to its location. Imported bearings whose inner and outer rings can be installed separately, such as cylindrical imported bearings, needle roller imported bearings, tapered imported bearings, etc., are very suitable for such occasions. Taper hole type self-aligning ball imported bearing and self-aligning roller imported bearing also simplify the installation procedure with the help of the shaft sleeve.

2022/09/05

这里是占位文字

What should be paid attention to for deep groove ball bearing

How to distinguish high-quality deep groove ball bearings? We can distinguish the overall quality of the bearing by the quality of the deep groove ball bearing surface. When our customers buy deep groove ball bearings, they often only choose some bearings with smooth surfaces. In fact, the surface of excellent deep groove ball bearings should be shiny. A smooth bearing is not necessarily a good product. The reason for the formation of dark surface is whether the steel used for deep groove ball bearing meets the standard and the cutting fluid used.

2022/08/26

这里是占位文字

Bearing application clearance and lubrication are very important

Correctly grasp the radial clearance of the bearing. The amount of thrust determines the matching degree of the bearing during the pushing process. Therefore, the initial radial clearance of the bearing should be measured before installation. In the whole process, it is also necessary to continuously measure the radial clearance until a more ideal interference fit is achieved.

2022/08/19

这里是占位文字