October 1970

In October 1970, the state-owned Lu'an Bearing Factory was approved for establishment, and the construction started on November 16.

2022/06/29

这里是占位文字

Imported bearings should be regularly maintained and inspected

In terms of the speed of imported bearings, the imported bearings are determined according to the type, size, accuracy, cage type, load, lubrication mode, cooling mode and other factors of imported bearings. The installation and disassembly of the imported bearing shall be frequently disassembled and installed in specific applications to ensure that it can be inspected and repaired according to its location. Imported bearings whose inner and outer rings can be installed separately, such as cylindrical imported bearings, needle roller imported bearings, tapered imported bearings, etc., are very suitable for such occasions. Taper hole type self-aligning ball imported bearing and self-aligning roller imported bearing also simplify the installation procedure with the help of the shaft sleeve.

2022/09/05

这里是占位文字

What should be paid attention to for deep groove ball bearing

How to distinguish high-quality deep groove ball bearings? We can distinguish the overall quality of the bearing by the quality of the deep groove ball bearing surface. When our customers buy deep groove ball bearings, they often only choose some bearings with smooth surfaces. In fact, the surface of excellent deep groove ball bearings should be shiny. A smooth bearing is not necessarily a good product. The reason for the formation of dark surface is whether the steel used for deep groove ball bearing meets the standard and the cutting fluid used.

2022/08/26

这里是占位文字

Bearing application clearance and lubrication are very important

Correctly grasp the radial clearance of the bearing. The amount of thrust determines the matching degree of the bearing during the pushing process. Therefore, the initial radial clearance of the bearing should be measured before installation. In the whole process, it is also necessary to continuously measure the radial clearance until a more ideal interference fit is achieved.

2022/08/19

这里是占位文字

What are the differences in bearing construction

As for the bearing, many people may not be very clear about it or what it is used for. In fact, it is an important part of mechanical equipment, which is widely used in industrial machinery. So what parts are the bearing construction methods composed of, and what kinds of differences are there in the bearing construction methods? Here's a detailed analysis.

2022/08/12

这里是占位文字

Bearing cleaning method

Bearing is an important part of mechanical equipment, which is mainly used to support mechanical rotators and is widely used in industrial production. However, bearings also need to be cleaned frequently to ensure grease removal and performance. Maybe many people don't know how to clean the bearing. Now let's briefly introduce the cleaning method of the bearing to help you clean the bearing quickly and effectively.

2022/08/05

这里是占位文字